Epiroc FlexiROC T20 R User Manual

18
Operator's instructions
2. Technical data
2.Technical data
FlexiROC T20 R
Weight (standard equipment without drill steel)
FlexiROC T20 R
Weight 5750 kg
Performance
Diesel engine, Cummins QSB3.3
power output at 2400 rpm/min 82 kW 110 HP
Temperature range in operation
-25° C +40° C
Tramming speed, max.
5 Km/h
Traction force (low/high gear)
59 kN
Ground clearance
220 mm
Max. hydraulic pressure
290 bar
Noise Level
Max. engine speed (2500 giri/min.) 117 dB (A)
Drilling (2500 giri/min.) 124,5 dB (A)
128 dB(A) guaranteed
Tilt angles
Note
Stability is specified with respect to CE standards stipulating that rigs must not be
operated on inclines steeper than 20 degrees without the use of a winch.
ANGLES MUST NOT BE COMBINED!
Tilt angles for drill rig when drilling:
longitudinally, max. (Downward/Upward)
20°
lateral (left/right).
10°
laterally, (left/right), in extreme positions.
10°
Tilt angles - tramming (in direction):
downward/upward, max. without winch
20°
laterally, max. (Left/Right)
10°
downward/upward, with winch
>20° - < 30°
Max pressure on the ground of stability jacks
0.5MPa

Epiroc FlexiROC T20 R Specifications

General

Brand	Epiroc
Model	FlexiROC T20 R
Category	Construction Equipment
Language	English