65
Operator's instructions
5. Operating
Stopping the diesel engine
NOTE: If the engine is hot, run it at idling speed for a couple of minutes before switching off.
1. Switch over the remote control box to tramming mode. Switch (2), position c.
NOTE: NOTICE! The engine speed must be lowered to idling before the
compressor is discharged.
Remote control box
2. Stop the diesel engine by depressing touch button (12) or (13).
3. Switch off the box by pressing and holding touch button (10).
4. Deactivate the drill rig's main power contactor. Switch S300 in position (1b).
To Next Page
Loading...
Need help?
General
