Epiroc FlexiROC T20 R User Manual

84
Operator's instructions
7. Drilling
8. Drilling

Danger of accidental operation
 May cause serious personal injury and
damage to property
 The operator must always have an
overview of the rig and the remote control
box
 Always check that the controls are
correctly adjusted before operating
 Always deactivate the remote control box
when it is not in use
Start of manual drilling
1. Set the remote control box in drilling mode, switch (2), position b.
Remote control box
2. Check that the dust collector and flushing air are activated. When the dust collector is
active, the symbol for the dust collector is shown in the display on the radio box (A).

Epiroc FlexiROC T20 R Specifications

General

Brand	Epiroc
Model	FlexiROC T20 R
Category	Construction Equipment
Language	English