Epiroc FlexiROC T20 R User Manual

37
Operator's instructions
4. Controls
Each setting can only be adjusted when the corresponding function is activated. The setting is made with arrow up and
down for all settings in the shortcut menus.
NOTE: Only set high percussion pressure when high percussion is used.
A pressure transducer measures the pressure information, and the lower value is the desired PWM current for Y100.
Can only be used when the function is used. Adjust desired current with arrow up and down.
NOTE: Only set high feed pressure when high feed is used.
A pressure transducer measures the pressure information, and the lower value is the desired PWM current for Y103.
Can only be used when the function is used. Adjust desired current with arrow up and down.
Setting the rotation speed. Pressure is only read during drilling. Adjust desired current with arrow up and down.

Epiroc FlexiROC T20 R Specifications

General

Brand	Epiroc
Model	FlexiROC T20 R
Category	Construction Equipment
Language	English