Epiroc FlexiROC T20 R User Manual

50
Operator's instructions
4. Controls
Activation of hole depth/hole length setting
1. In drilling mode turn the multifunction knob (4) then double click it. Turn the knob
to select between hole depth or hole length.
2. Click the multifunction knob once more to activate the length setting. Turn the knob
to set the correct length.
3. Click one last time on the multifunction knob to save the value.
Note: make sure to follow step by step the sequence on how to change the rod or the deep recorder will not identify the
second one
Menu tramming speed , winch power and feed pressure
Tramming speed
Tramming speed
The menu for tramming speed adjustment appears when the switch is in the Tramming position, with tramming levers
activated. Adjust tramming speed using the multifunc tion knob.

Epiroc FlexiROC T20 R Specifications

General

Brand	Epiroc
Model	FlexiROC T20 R
Category	Construction Equipment
Language	English