Epiroc FlexiROC T20 R User Manual

92
Operator's instructions
7. Drilling
Remote control box
2. Open the drill-steel support. Switch (12) position (c).
3. Pull up the drill string up until the sleeve reaches the drill-steel support. Right-hand
multifunction lever (5), sector (c).
4. Close the drill-steel support. Switch 12 to position (a).
5. Activate unthreading by moving the right-hand multifunction lever to sector (h).
Sector description - Right-hand multifunction lever
6. Unthread the shank adapter from the drill rod.

Epiroc FlexiROC T20 R Specifications

General

Brand	Epiroc
Model	FlexiROC T20 R
Category	Construction Equipment
Language	English