Configuration Menu
59
c
For items adjusted using an adjustment bar such as the Brightness, you can press the [Default] button
while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the Image or Signal in the
Configuration menu. Note that the items displayed for the Image, Signal, and Info vary depending on the
image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Dynamic, Bright Cinema, Natural, Cinema Select a color mode based on your sur-
roundings and the image you are projec-
ting.
s p.34
Brightness
Adjusts the brightness when the image
appears too dark.
Contrast
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura-
tion
Adjusts the color saturation for the im-
ages.
Tint
Adjusts the tint for the images.
Sharpness
Adjusts the image sharpness.
White Balance
Color Temp. Adjusts the tint for the images. The image
is tinted blue for high values, and tinted
red for low values.
G-M Correction
The image becomes greener when set to
a positive value and redder when set to a
negative value.
Custom
Adjusts the offset and gain for each R, G,
and B color.
Grayscale Adjustment Level, Red,
Green, Blue, Brightness
Adjusts red, green, blue, and brightness
for the selected adjustment level.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
