Maintenance
92
Color Uniformity
If colors in the projected image are uneven, you can adjust the color tone of the whole image in Color
Uniformity.
c
The color tone may not be uniform even after performing color uniformity.
a
Press the [Menu] button while
projecting, and then select Display
from Extended.
b
Select Color Uniformity, and then
press the [Enter] button.
The following screen is displayed.
Color Uniformity: Turns color uniformity
on or off.
Adjustment Level: There are eight levels
from white, through gray, and up to black.
You can adjust each level individually.
Start Adjustments: Starts making color
uniformity adjustments.
Reset: Resets all adjustments and settings
for Color Uniformity to their default
values.
c
The image may become distorted
while adjusting Color
Uniformity. The image is restored
once adjustments are complete.
c
Select Color Uniformity, and then
press the [Enter] button.
d
Set this to On, and then press the
[Esc] button.
e
Select Adjustment Level, and then
press the [Enter] button.
f
Use the left and right buttons to set
the adjustment level.
g
Press the [Esc] button to return to the
previous screen.
h
Select Start Adjustments, and then
press the [Enter] button.
i
Select the area you want to adjust, and
then press the [Enter] button.
Adjust the outer areas first, and then adjust
the whole screen.
j
Use the up and down buttons to select
the color you want to adjust, and then
use the left and right buttons to adjust.
Press the left button to weaken the color
tone. Press the right button to strengthen
the color tone.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
