Setting Up the Projector 23
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. See page 91 for transportation
instructions. If you are moving the projector by hand, use a carrying
case (included with the EX3200/EX5200/EX7200 only).
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an HDMI signal from your video device, you’ll need
an HDMI cable (EX5200/EX7200 only). One may be provided
with your video equipment.
■ To receive a component video signal from a DVD player or other
video device, you’ll need a component-to-VGA video cable. One
may be included with your video equipment, or you can purchase
the ELPKC19 cable from Epson. See “Optional Accessories” on
page 18.
■ To receive an S-Video signal, you’ll need an S-Video cable. One
may be included with your video equipment, or you can purchase
one from Epson. See “Optional Accessories” on page 18.
■ To receive an audio signal, you’ll need an RCA-type audio cable
with two male plugs (EX5200/EX7200), or a stereo mini-jack to
RCA-type audio adapter cable (with red and white jacks on one
end; VS200/EX3200).
To Next Page
Loading...
Need help?
Projection Specifications
