To Next Page

To Previous Page

1. Connect the HDMI cable to your video source's HDMI output port.

Note: To display signals in the 18 Gbps transmission band, such as from a 4K 60 fps source, use a

cable rated for HDMI 2.0 or higher or you may have trouble displaying an image. If you experience

any trouble displaying images at 18 Gbps, change the EDID setting to Normal.

2. Connect the other end to one of the HDMI ports on the rear of the projector.

Note: When an audio/video source that meets the HDMI CEC standard is connected to one of the

projector's HDMI ports, you can use the projector's remote control to control certain features of the linked

device by accessing the Settings menu and setting HDMI Link to On.

Parent topic: Projector Connections

Related references

Projector Feature Settings - Settings Menu

Input Signal Settings - Signal Menu

Connecting External Speakers Using HDMI ARC

If your external speakers or A/V receiver are HDMI ARC-compatible, you can connect them to the

projector's HDMI2 (ARC) port using an optional HDMI cable. Make sure the HDMI Link setting is

enabled and AV System is selected as the Audio Out Device setting.

Epson LS500W User Manual

Questions and Answers: