87
Adjusting Detail Enhancement
You can enhance the contrast in detailed areas of an image to create a more textured look.
Note: This feature may not be available depending on the projection mode and input signal.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
You see a screen like this:
3. Select the Image menu and press Enter.
4. Select the Image Enhancement setting and press Enter.
5. Select the Detail Enhancement setting and press Enter.
6. Adjust each of the following options as necessary:
• Strength to adjust the image contrast
• Range to adjust the enhanced area of the image
Note: Higher values increase the intensity of the effect.
7. Press Menu or Esc to exit the menus.
Parent topic: Using Advanced Image Adjustment Features
To Next Page
Loading...
Need help?
General