Epson LS500W User Manual

73
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic: Using Basic Projector Features
Changing the Image Aspect Ratio
You can only change the aspect ratio to resize the displayed image. The input signal must be low
resolution.
Note: Aspect setting adjustment is only available when projecting from an HDMI source. You may not
be able to change the Aspect setting depending on the input signal from the HDMI source. When a 4K
image signal is being input, you can only select the Normal setting.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button on the projector's control panel or remote control.
3. Select the Signal menu and press Enter.
4. Select Aspect and press Enter.

Epson LS500W Specifications

General

Brand	Epson
Model	LS500W
Category	Projector
Language	English