To Next Page

To Previous Page

Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or

the projector may not respond to commands. If you will not use the remote control for a long time,

remove the batteries.

Parent topic: Using Basic Projector Features

Pairing the Remote Control (LS500WATV/LS500BATV)

To use Android TV and video-on-demand features, you must pair the projector remote control to the

included streaming device.

Note: When you first turn on the projector after connecting the included streaming device, instructions

for pairing the projector remote control are displayed on the screen. If the pairing screen is not displayed,

make sure that the projector and the streaming device are on, then press and hold the Esc and right

arrow buttons on the projector remote control for about 7 seconds.

1. Turn on the projector.

2. Select the correct input source, if necessary.

3. Press and hold the Home and Enter buttons on the projector remote control until the indicator

starts blinking.

A message appears on the screen when the projector remote control is paired.

Parent topic: Using Basic Projector Features

Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may

want to switch from one image source to the other.

Note: Your remote control may look different from the illustration below, but the instructions are the

same.

1. Make sure the connected image source you want to use is turned on.

2. For video image sources, insert a DVD or other video media and press its play button, if necessary.

Epson LS500W User Manual

Questions and Answers: