Removing Media
Caution:
❏ If the media weighs over 20 kg, it should not be
carried by one person. When loading or
removing the media, use at least two people.
❏ Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
To prevent the take up roll from dropping,
support the roll at its left end.
B
Loosen the left roll core holder screw and remove
the roll core holder from the roll.
C
Lower the roll onto the roll support.
D
To prevent the take-up roll from dropping,
support the roll at its right end.
E
Loosen the right roll core holder screw and
remove the roll core holder from the roll.
F
Lower the roll onto the roll support.
G
To remove media from the rear media feeding
unit, reverse the steps you followed to load it.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series Operator's Guide
Basic Operations
22