G
Move the lock switch to the left to lock it.
Repeat steps 2 to 7 to replace other ink supply
units.
c
Important:
Place ink supply units in all the trays, and then
insert them into the ink unit. Printing is not
possible if, for even one color, an ink supply
unit is not loaded into a tray or a tray is not
inserted into the ink unit.
DisposalU “Disposal” on page 45
Disposing of Waste Ink
Preparing and Replacement
Timing
When Prepare empty waste ink bottle. is displayed
Prepare a new waste ink bottle as soon as possible.
When you want to replace the waste ink bottle at this
stage due to night operations and so on, select Replace
Ink Bottle from the setup menu, and then replace the
bottle. If you perform the replacement without selecting
Replace Ink Bottle, the waste ink counter will not
operate correctly.
Details on the setup menu U User's Guide (Online
Manual)
Waste Ink Counter U “Waste Ink Counter” on
page 40
c
Important:
During printing or while the printer is running the
operations shown below, do not remove the Waste
Ink Bottle unless instructed to do so by the on-screen
instructions. Failure to observe this precaution
could cause ink to leak.
❏ Head Cleaning
❏ Head Washing
❏ Ink Refresh
❏ Pre-Storage Maint.
When Replace waste ink bottle and press OK. is
displayed
Replace the waste ink bottle with a new bottle
immediately.
Replacement procedure U “Replacing the Waste Ink
Bottle” on page 40
Waste Ink Counter
The printer uses the waste ink counter to track waste ink
and displays a message when the counter reaches the
warning level. If you replace the Waste Ink Bottle when
the message “Replace waste ink bottle and press OK.”
is displayed, the counter is cleared automatically.
If you need to replace the waste ink bottle before the
message is displayed, select Replace Ink Bottle from the
setup menu.
U User's Guide (Online Manual)
c
Important:
If you replace the Waste Ink Bottle before being
prompted by a message, always clear the waste ink
counter. Otherwise, the replacement interval for the
Waste Ink Bottle will no longer be notified correctly
from the next message.
Replacing the Waste Ink Bottle
Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series Operator's Guide
Maintenance
40