C
Align the document guide on the left side with
the edge of the document.
D
Check that the paper basket is open.
Procedure for Copying
A
Load the paper into the printer.
U “Loading and Setting the Paper” on
page 34
B
Load the document into the printer.
U “How to Load Documents” on page 105
C
Touch Copy on the Home screen.
D
In Basic Settings, do the settings for Color,
Quality, Density, and Reduce/Enlarge.
U “Copy menu (SC-T5400M Series Only) ” on
page 170
If you are doing detailed settings, such as
Original Type, do the settings from Advanced.
U “Copy menu (SC-T5400M Series Only) ” on
page 170
If you are using the optional carrier sheet, you
must do the following settings in Advanced.
❏ Specify the Original Size from a standard size.
❏ Set Top Offset to 19 mm.
Note:
You can register and save frequently used settings
as presets. See the following for more details.
U “Using your Presets” on page 17
E
Touch the numeric value for the number of
prints and then enter the number of prints in the
keypad screen.
F
Press the Copy button to start scanning the
document.
G
Remove the original when scanning is complete.
While holding the original, press the OK button
on the screen, and then remove the original.
Printing starts when the original has been
completely removed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Copy (SC-T5400M Series Only)
106
To Next Page
Loading...
Need help?
General