Enlargements and
Horizontal and Vertical
Banners
The printer driver can enlarge or reduce documents for
different paper sizes. There are three setting methods.
Before printing at non-standard sizes, including vertical
or horizontal banners and documents with equal sides,
enter the desired paper size in the printer driver.
U “Printing at Non-Standard Sizes” on page 68
❏ Fit to Roll Paper Width
Automatically enlarges or reduces the image size to
fit the roll paper width.
❏ Fit to Output Size
Automatically enlarges or reduces the image size to
fit the paper size.
❏ Specify Size
You can specify the enlargement or reduction ratio.
Use this method for a non-standard paper size.
Note:
❏ When printing from applications designed expressly
for horizontal or vertical banners, adjust printer
driver settings as described in the application
documentation.
❏ When using a Windows application designed for
banners, select Print Banner on the Layout tab if
necessary.
Fitting Documents to the Width
of the Roll Paper
A
Check the document size (or paper size) setting
on the Printer Settings tab of the printer driver.
Windows
Display the Printer Settings tab of the printer
driver from the application and check that the
document size is the same as the setting of the
application.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Printing with the Printer Driver from Your Computer
63
To Next Page
Loading...
Need help?
General