Note:
❏ Connecting a supported scanner to the printer
displays a Enlarged Copy button on the screen
(SC-T5400 Series/SC-T3400 Series/SC-T3400N
Series only).
Inserting USB flash drive into the printer displays a
Memory Device button on the screen.
U “Making Enlarged Copies with an A3 or A4
Scanner (SC-T5400 Series/SC-T3400 Series/SC-
T3400N Series Only)” on page 111
U “Direct Printing of Files on USB Flash Memory”
on page 101
❏ The Copy, Scan, and Network Folder buttons
appear on the SC-T5400M Series.
U “Copy (SC-T5400M Series Only)” on
page 103
U “Scanning (SC-T5400M Series Only)” on
page 107
U “Printing Files from a Shared Folder (Print from
Folder) (SC-T5400M Series Only)” on page 100
Using your Presets
The following screen has a Presets button at the top
right of the screen. (The following illustration shows an
example of the Copy screen.)
❏ Enlarged Copy screen (except for the SC-T5400M
Series)
❏ Copy, Scan, Memory Device screen (SC-T5400M
Series only)
❏ Press Presets and then Overwrite User Settings to
continue using the current settings from the next
time you print.
❏ Press the Presets button, press Save as Preset, enter
the name you want to use, and then press OK to
register the current settings as a preset.
Entering a registration name
You can use a keyboard to enter the name of the preset.
A Change character type button
Each time you press the button, the type of
characters you can enter change as follows.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Introduction
17