Replacing Maintenance
Box
If The Maintenance Box is at the end of its service life.
is displayed, replace the Maintenance Box.
If The Maintenance Box is nearing the end of its
service life. is displayed, ready a new Maintenance Box.
Printing is possible until replacement is instructed.
Supported maintenance box U “Options and
Consumable Products” on page 218
c
Important:
Do not replace the Maintenance Box while printing.
Waste ink may leak.
Note:
You can replace the Maintenance Box while viewing the
procedure on the screen. To see the guide, from the Home
screen, touch Settings - Maintenance - Replace
Maintenance Box.
When you open the Maintenance Box cover for
SC-T5400 Series/SC-T5400M Series, you will find a
Maintenance Box on both the left and right sides. The
replacement procedure is the same for both of them.
A
Open the Maintenance Box cover.
B
Pull out the Maintenance Box.
C
Place the used Maintenance Box in the clear bag
included with the new Maintenance Box, and
make sure that the zipper is closed tight.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Maintenance
188
To Next Page
Loading...
Need help?
General