EasyManuals Logo
Home>ergoline>Fitness Equipment>ergometrics er 800S

ergoline ergometrics er 800S User Manual

ergoline ergometrics er 800S
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
Operation Manual
Ergometer
Type er800S
Chapter 4: Safety & Maintenance
er800S Operation Manual 16 Version: 05/02
Art-Nr: 475.051
It is necessary to ensure that no dangerous ground currents occur as a
result of attaching the ergometer to other devices. Device specifications
of the ergometrics er800S are in the appendix to this manual. Direct your
questions to your dealer or to ergoline’s service department.
Especially when coupling several devices to a measurement system it has
to be taken care that proper grounding is achieved via a single power sup-
ply, e.g. wall socket.
The ergometrics er800S ergometer should only be operated where elec-
trical requirements meet IEC 601-1.
This device is not suitable for use in rooms or areas where there is danger
of explosion.
Always observe accident prevention precautions when operating this
device.
!
This unit may only be operated for therapy or diagnosis purposes under
the supervision of qualified personal.
ergoline GmbH is only responsible for the safety and reliability of this device
if:
" all revisions, enhancements, repairs and service to the device are carried out by
ergoline authorized personnel (e.g. an ergoline dealer),
" ambient electrical service where the device is installed conforms to VDE 0107
and
" the device is operated in accordance with the operations manual.
4.4 Normative Notices
4.4.1 Notice for EMC (electromagnetic compatibility)
- The EMC test was done with an interference level of 3V/m. The device should not be
used in areas with a higher level.
- The device should not be used beside a high voltage system.
- To connect the device with other devices it is only allowed to use special shielded
cables provided by ergoline.
- Strong transmitting equipment may not be operated in the immediate vicinity of this
device.
- Electromagnetic interferences will appear first by an instable value of load in the dis-
play. If the value changes without reason while the speed is >30 1/min, this may be
caused by an electromagnetic interference.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ergoline ergometrics er 800S and is the answer not in the manual?

ergoline ergometrics er 800S Specifications

General IconGeneral
Brandergoline
Modelergometrics er 800S
CategoryFitness Equipment
LanguageEnglish

Related product manuals