Precautions in Usage
8
Platinous User’s Manual
Keep Out of the Chamber
RISK OF BEING TRAPPED! NEVER climb inside the chamber. The
door cannot be opened from the inside.
2.2 Specimen Protection (Safety Devices)
Set safety devices according to test conditions and the type of
specimens. Unless properly set, specimens could be damaged if
something goes wrong during testing.
The chamber is controlled to a target constant temperature and humidity* by the controller. Nonetheless,
temperature and humidity can get out of control for various reasons. In such cases, to protect specimens
against thermal damage, the chamber has an independent overheat protector and various other safety
devices built into the software of the controller.
* Humidity is not set with temperature only chambers.
To Next Page
Loading...
Need help?
General
