1. Place the thread and spool holder onto the spool pin.
For smaller spools of thread, place spool holder with
the small side next to the spool or use the small spool
holder.
2. Snap the thread into the thread guide (Child beneath
thread guide cover).
3. Wind the thread clockwise around the bobbin winder
tension discs.
4. Place the thread end through one of the inner holes in
the bobbin as illustrated and place empty bobbin on
the spindle.
5. Press the bobbin winder stopper against the bobbin.
WINDING THE BOBBIN
WINDING THE BOBBIN
1
2
3
4
11
3
5
4
12
3
1
4
2
4
5
Bobbin winding
To Next Page
Loading...
Need help?
General
