Euro-Pro 9110 User Manual

Using the overcasting foot
1. Change the presser foot to the overcasting foot.
2. Sew the fabric with the fabric edge against the guide of the overcasting foot.
Attention: The overcasting foot should be used to sew with patterns 05 and 08 only and do
not set the stitch width narrower than "5.0". It is possible that needle could hit the presser
foot and break when sewing other patterns and width.
1. Change the presser foot to the all purpose foot.
2. Sewing the overcasting along the edge of the fabric so that the needle drops over the edge of
the fabric on the right side.
3
32
OVERCASTING STITCHES
OVERCASTING STITCHES
Using the all purpose foot
E
1
3
5.0~7.0
2.0~3.0
T
1
2.5~4.5
2.0~3.0
2
2

Euro-Pro 9110 Specifications

General

Brand	Euro-Pro
Model	9110
Category	Sewing Machine
Language	English