39
ADJUSTING PATTERN BALANCE
ADJUSTING PATTERN BALANCE
If the decorative stitch patterns, numbers or manual buttonhole stitch are uneven when
you sew on a particular fabric, adjust them with the feed balancing dial.
The dial should usually be in a neutral
position.
ABC
ABC
ABC
Adjusting distorted stretch stitch patterns
A. When Patterns are too compressed, correct
by turning the dial in the direction of "".
B. Correct setting.
C. When Patterns are too drawn out, correct
by turning the dial in the direction of "+".
Adjusting distorted letters or numbers
A. When the letters or numbers overlap, turn
the dial to "".
B. Correct setting.
C. When the patterns are too drawn out,
correct by turn the dial to "+".
Adjusting the stitch density for buttonhole
A. Right side is denser. If the left side of the
buttonhole is less dense than the right side,
turn the feed balancing dial to "".
B. Correct setting.
C. Left side is denser. If the right side of the
buttonhole is less dense than the left side,
turn the feed balancing dial to "+".
To Next Page
Loading...
Need help?
General
