MEMORY
MEMORY
62
5. The cursor on the LCD screen will move along with the
sequential pattern while sewing.
6. Press the " " button to leave memory mode and return to
the normal screen.
1. Press the " " button to enter memory mode and then input
the number of memory module when the cursor start flashing.
2. Input the number of memory module. (e.g. 2)
3. The LCD screen containing the various types of stitches will
open.
Recalling and sewing the memorized pattern
6
1
2
4. Press on the foot control or press the start/stop button to
start the sewing machine.
4
Please Note: If the cursor stays in a vacant position in
the end, the machine will start sewing from the first
pattern. If the cursor stays under a specific pattern, the
machine will start sewing from that pattern.
3
5
To Next Page
Loading...
Need help?
General
