To Next Page

To Previous Page

3.2.Upgrade

This procedure is only to be followed when you want to upgrade from one Xeebra 2.x version to another

2.x version.

Prerequisites

To be able to upgrade Xeebra, the following prerequisites should be fulfilled:

• Xeebra hardware with RAID (XEE-2U-4 or PMX-2U-4),

• Xeebra client hardware (XEC-4100S or Lenovo P330/340),

• 1 USBkey 16 GB or higher (by preference USB 3.0).

Preparing the USBKey

1. Connect the USBkey to a Windows 7/10 machine.

If the USB key is not empty, please format it.

2. In the Device field, select your USBkey.

3. Click the SELECT button to the right of the Boot Selection field.

4. Browse for the Xeebra ISO file, select it and click Open.

The ISO file should have been shared with you: evs-xeebra_2.6.iso.

8| March 2022 | Issue 2.6.G

Questions and Answers:

Need help?

Do you have a question about the EVS Xeebra and is the answer not in the manual?

EVS Xeebra Specifications

General