When selected, the unit continually
evaluates signal strength and, if a better
signal becomes available, the unit will
switch to that alternative. It mutes while it
checks a list of alternative frequencies
and, if necessary, it will search once
across the selected waveband for a
genuine alternative frequency.
It will restore radio reception when it finds
one or, if one is not found, the unit will
return to the original stored frequency.
When selected, ‘AF’ will be shown in the
display.
1. Press the MENU button.
2. Select AUDIO or AUDIO MENU.
3. Scroll to ALTERNAT FREQ. or
ALTERNATIVE FREQ. and turn on or
off with the OK button.
4. Press the MENU button to return.
REGIONAL MODE (REG)
Regional mode (REG) controls the
behaviour of AF switching between
regionally related networks of a parent
broadcaster. A broadcaster may run a
fairly large network across a large part of
the country. At various times of the day
this large network may be broken down
into a number of smaller regional
networks, typically centred on major
towns or cities. When the network is not
split into regional variants, the whole
network caries the same programming.
Regional mode ON: This prevents
'random' AF switches when neighbouring
regional networks are not carrying the
same programming.
Regional mode OFF: This allows a larger
coverage area if neighbouring regional
networks are carrying the same
programming, but can cause 'random'
AF switches if they are not.
1. Press the MENU button.
2. Select AUDIO or AUDIO SETTINGS.
3. Scroll to RDS REGIONAL and turn on
or off with the OK button.
4. Press the MENU button to return.
248
Audio unit menus
To Next Page
Loading...
Need help?
General
