Before giving a voice command, wait for
the system announcement to finish
followed by a single beep. Any command
spoken before this does not register with
the system.
Speak naturally, without long pauses
between words.
You can interrupt the system at any time
while it is speaking by pressing the voice
button. You can also cancel a voice session
at any time by pressing and holding the
voice button.
Initiating a Voice Session
Press the voice button. A list of
available commands appears in
the display.
DescriptionCommand
Stream audio from your cell phone.Bluetooth audio
Cancel the requested action.(cancel | stop | exit)
Access the device connected to the auxil-
iary input jack.
((line | AV | audio video) in | AUX | audio
video)
Make calls.(phone | Blackberry | iPhone | Mobile)
Access the device connected to your USB
port.
(USB [stick] | iPod | MP3 [player])
Adjust the level of voice interaction and
feedback.
voice settings
Hear a list of voice commands available in
the current mode.
[main menu] help
System Interaction and Feedback
The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and your chosen level of
interaction. You can customize the voice
recognition system to provide more or less
instruction and feedback.
The default setting is to a higher level of
interaction in order to help you learn to use
the system. You can change these settings
at any time.
Adjusting the Interaction Level
Press the voice button. When
prompted:
DescriptionCommand
Provides access to change the interaction level.voice settings
Then any of the following:
258
Kuga (CBS) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, CG3585en enGBR, Edition date: 02/2014, None
SYNC™ (If Equipped)
To Next Page
Loading...
Need help?
General
