The CRIT-LINE III System
1-5
____________________________
1.5 Display Screens
The CLM III utilizes three primary display screens, and several secondary screens
that contain specific feature menus. To use the CLM III, simply follow the correct
“path” to the function you desire.
To assist you, each screen has a corresponding icon (seen to the right of the actual
screen in this section).
The “path” that you need to take to get to a specific function will be mapped at the
beginning of each section detailing that function in this manual. Below each sections
title are the icons of the screens that you will see on the way to your final display
choice. Using the appropriate keypad choices, you can navigate through the screens
in the mapped order.
Primary Display Screens
The MAIN MENU screen allows you to
choose the operating mode of the CLM III.
NOTE: New Monitors sold after January
2006 may not display the
H ABF option
on the Main Menu
NOTE: New Monitors sold after August
2011 may not display the TQA option on
the Main Menu
The STARTUP screen is the central
display for most CLM III functions. All
measurements, warnings, or messages
can be viewed from this screen.
The PROFILE screen displays a plotted graph
of the change in the measured parameters
versus time to allow you to see the trend in
those measurements.
To Next Page
Loading...
Need help?
General
