Instrument Maintenance
8-2
__________________________________
8.2 Cleaning the CLM III
The CLM III outer casing should only be cleaned with a standard dilute bleach solution, or with any
of the several varieties of surface disinfectants (i.e. Cavicide, Envirocide, etc.). These products
should be sprayed onto a soft cloth and then the cloth should be used to clean the monitor.
Solutions such as Envirocide (when mixed in proper ratios) may also be used to clean
the CLM III.
NOTE: Before sending the CLM III to another location (service center, etc.), be sure that it
has been cleaned in the manner described above.
___________________________________________
8.3 Cleaning the Display Screen
The display screen may be cleaned with a soft, damp cloth. The use of paper towels or
abrasive materials during cleaning may scratch the display screen.
When possible, avoid cleaners or any other liquids on the display screen unless it
becomes necessary to disinfect the screen. Apply the cleaner directly to the soft cloth
followed with a soft cloth dampened with water.
8.4 Service
All repairs must be directed to an authorized service center.
Contact the Technical Service Department at 800-546-5463 or 801-451-9000 or your
local distributor for the location of the nearest service center.
__________________
8.5 Warranty
Fresenius Medical Care will repair or replace, at its sole option, any product that it feels
was defective at the time of shipment to the original purchaser if it is returned, prepaid,
within one year of date of shipment. Repair or replacement shall be the exclusive
remedy.
Any repair or attempt to repair, other than by the factory, automatically voids this
warranty, unless authorized by Fresenius Medical Care. Under no circumstances will
Fresenius Medical Care be liable for any direct or indirect incidental or consequential
loss, damage or expense of any kind (including without limitation, loss of profits,
economic loss, medical expenses, or personal injury claims); whether such claim is