Output Format
127
Copy
3
Booklet Creation (Creating a Booklet)
This feature allows you to layout the copied pages so that they will be in the right order
when folded and bound as a booklet. You can also shift the pages for binding and add
covers.
When the Finisher-C1 with Booklet Maker (optional) is installed, you can also fold the output
sheets in half, or staple the folded output sheets.
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, you can also crease the
output sheets in half, or staple the creased output sheets.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
• When the Finisher-B1 or the Finisher-C1 is installed, do not remove outputs from the finisher tray
until all the output sheets have been delivered.
Note • The machine copies four pages of the document onto one sheet of paper. If the number of pages in
the booklet is not a multiple of four, the remaining pages will be output as blank pages.
• If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is automatically
selected. Change the setting if necessary. For information on [Auto Paper Off], refer to "5 Tools" >
"Copy Service Settings" > "Copy Control" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2 Select [Booklet Creation] on the [Output
Format] screen.
3 Select any option.
îš„ Off
Disables this feature.
îš„ Create Left/Top Bound Booklet
Copies are made to enable left binding or top binding.
îš„ Create Right Bound Booklet
Copies are made to enable right binding.
To Next Page
Loading...
Need help?
General
