Fax/Internet Fax Options
237
Fax
4
îš„ Password
Select the [Password] box, and enter the password using the numeric keypad. If a password
is not set, leave this box blank.
Note • You can enter up to 20 digits for the password.
îš„ Keyboard
You can use the keyboard to enter the F code or the password.
For information on how to enter texts, refer to "Entering Text" (P.73).
10 Specify a destination, and then press the <Start> button.
Internet Fax Profile (Specifying Internet Fax Profiles)
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-compatible machines.
Note • The profiles that can be processed differ depending on the Internet Fax-compatible machine of the
recipient. Before specifying a profile, confirm the profiles the Internet Fax-compatible machine of
the recipient can process.
• If inconsistency occurs between a profile, and stored document size and resolution, priority is given
to the settings specified in the profile.
• If the profile differs for each recipient when using Broadcast Send, the smallest size becomes the
maximum image size.
You can set an Internet Fax profile for each address number. For information on how to register address numbers, refer to
"5 Tools" > "Setup" > "Add Address Book Entry" in the Administrator Guide.
You can change the default value of [Internet Fax Profile] in the System Administration mode. For information on how to
change the default value, refer to "5 Tools" > "Fax Service Settings" > "Fax Defaults" > "Internet Fax Profile" in the
Administrator Guide.
1 Select [Internet Fax Profile].
2 Select any option.
îš„ TIFF-S
This profile is the Internet Fax standard. For documents that are larger than A4, the size is
reduced automatically to A4 for transmission.
z
Encoding method : MH
z
Stored document size : A4
z
Resolution : Standard (200 x 100 dpi), Fine (200 dpi)
To Next Page
Loading...
Need help?
General
