E-mail Options/Filing Options
343
Scan
5
2 Select [On].
îš„ Off
Select this option when you do not request read receipts.
îš„ On
Select this option when you request read receipts.
Split Send (Sending in Sections)
When using the E-mail service, and the size of the data to be attached is large, you can split
the data at page breaks or by a certain data size and then send the data.
For information on [Split Send], refer to "5 Tools" > "E-mail/Internet Fax Service Settings" > "E-mail Control" > "Split Send
Method" in the Administrator Guide.
1 Select [Split Send].
2 Select any option.
îš„ Split by Page
The data is split at page breaks.
Note • [Split by Page] is available only when [File Format] on the [E-mail] screen is set to [PDF],
[DocuWorks], or [XPS]
*
, or when [File Format] is set to [TIFF] with [Single File for Each Page] check
box not selected.
* : XPS stands for XML Paper Specification.
îš„ Split by Data Size
The data is split by a certain data size.
Note • Select this option if your e-mail application supports message/partial.
To Next Page
Loading...
Need help?
General
