3 Copy
160
Copy
3
[Build Job - Chapter Start] Screen
This screen allows you to set the chapter start.
îš„ Off
The next stack of documents is copied after the previous stack.
îš„ On
The next stack of documents is copied from Side 1 of a new sheet of paper.
îš„ Pages per Side - New Page
When [Pages per Side] is set, even if all documents are divided for every chapter before all
of them are assembled in the Pages per Side feature, the next stack of document is copied
from Side 2 of the paper.
[Segment Separators] Screen
This screen allows you to insert a sheet of paper as a separator in between each stack of
documents. You can specify the number of separators to insert in the range from 1 to 99 as
necessary.
Note • You can specify different settings for each stack of documents. If you do not specify particular
settings for each stack of documents, the previously specified settings are applied.
1 Select any option.
2 Select any option.
îš„ No Separators
Does not insert any separators.
îš„ Blank Separators
Inserts blank separators.
If you select this option, load documents, and press the <Start> button, the blank separators
are inserted.
îš„ 1 Sided Side 1 Only
A first page of the loaded documents is copied on the front side of a separator, and the rest
of pages are copied on the paper other than a separator.
When [Pages per Side] is set, the number of pages (2 pages, 4 pages, or 8 pages) that you
selected to copy onto one side of a single sheet, starting from the first page of the loaded
documents, are copied onto the front page of a separator.
To Next Page
Loading...
Need help?
General
