Fuji Xerox DocuCentreS2320 User Manual

2 Environment Settings
54
Environment Settings
2
System Administrator Settings (Security)
You can set the system administrator's user ID and the passcode.
 System Administrator Settings

Administrator's Login ID
You can enter the system administrator's user ID (between 1 and 32 ASCII code
characters in length, excludes "+", ";", "<", ">", """, "?", "[", "]", "'", "{", "}", "|", ":". (Default: 11111)

Administrator's Passcode
You can set the system administrator's passcode (between 4 and 12 ASCII code
characters or blank). (Default: x-admin)

Retype Administrator's Passcode
You need to re-enter the system administrator’s passcode.

Maximum Login Attempts
When login attempts using the system administrator’s user ID fail repeatedly, access is
denied when the number of failed attempts reaches the number set here.
Specify a number between 0 and 10. Specify 0 to disable this setting.
The total number of failed authentication attempts is reset when authentication is
successful or the system is restarted. (Default: 5)
 [Apply] button
You can apply changes by pressing this button.
[Support] Tab
The links to support information is displayed. The link settings can be changed.
Support
 [Change Settings] button
You can change the links to support information by pressing this button.

Name
You can enter the link name (between 1 and 63 ASCII code characters).

URL
You can enter the link address (between 1 and 63 alphanumeric characters
including the at symbol (@), percent sign (%), period (.), colon (:), forward slash (/),
underline(_), hyphen (-), tilde (~), question mark (?), and ampersand (&), which are valid).
 [Apply] button
You can apply changes by pressing this button.
[Address Book] Tab
The list of location information where the scanned data is stored is displayed.
You can register the total of 30 E-mail and Server addresses.

Fuji Xerox DocuCentreS2320 Specifications

General

Brand	Fuji Xerox
Model	DocuCentreS2320
Category	Printer
Language	English