128 7 Maintenance
Replacement Procedure
Use the following procedure to replace the toner cartridges.
1. Open the side cover.
2. Push the orange latch backwards to pop
open the toner cartridge that you want to
replace.
3. Pull out the cartridge holder until it stops,
and then pull out the toner cartridge.
Important
• Be careful not to get your hands or clothes dirty with
toner. If toner gets on your hands or clothes, wash it
off immediately.
4. Remove a new toner cartridge from the
box. Make sure that the color of the new
toner cartridge matches that on the catridge
holder label before replacing it.
Shake the toner cartridge five or six times
to even out the toner inside.
5. Insert the toner cartridge into the
associated cartridge holder.
To Next Page
Loading...
Need help?
General
