5.2 Description of Menu Items 97
Panel Settings
Specifies whether to limit menu operations with a password to avoid changing the printer
settings by accident.
Default Color Sets the color mode. This settings is used when the color printing mode setting is not
specified for the print job that is sent to the printer.
•[Black]
Prints in black and white mode.
• [Color] (default)
Prints in the color mode.
Item Description
Panel Lock Sets whether to limit the menu operations with a password. Selecting [On] requires the
operator to enter the password. If [On] is set, then you must enter the password to use
the [Admin Menu].
• [Off] (default)
• [On]
Change Password Allows you to change the password. Enter a new password (4-digit number). The pass-
word takes effect when the first and second entries match. (default: [0000])
Note
• [Change Password] is valid only if [Panel Lock] is set to [On].
• If the first and second entries do not match, your new password will not be accepted.
• If you have forgotten the password, switch the printer off and restore the password to
the default.
1.Switch the printer on while holding down the <Menu> button. Keep holding down
the button until [Reset Password. Reset?] appears on the control panel.
2.Release the <Menu> button and press the <Eject/Set> button.
3.Press the < > button to select [Yes], then press the <Eject/Set> button. The
password is restored to the default.
Item Description
To Next Page
Loading...
Need help?
General
