98 5 Control Panel Menus
Tray Settings
You can set the paper size and paper type for the tray.
Tray 1
Specifies the settings for the paper loaded in the tray 1.
Note
• When the size or type of paper that is loaded in the tray is different from the setting on the control panel,
print quality may deteriorate or a paper jam may occur. Specify the correct paper type and size on the
control panel.
Item Description
Paper Type Sets the type of the paper loaded in the tray 1.
• [Plain Paper] (default), [Recycled Paper], [Bond Paper], [Heavyweight 1],
[Heavyweight 2], [Labels], [Coated 1], [Coated 2], [Coated 3], [Envelope]
Refer to
• " Setting the Paper Type of the Tray 1" (P. 78)
Paper Size Sets the paper size of the paper loaded in the tray 1.
• [A4 Portrait] (default), [A5 Portrait], [B5 Portrait], [8.5 x 11" P], [8.5 x 13" P], [8.5 x 14"
P], [7.25 x 10.5" P], [Env 3.9 x 7.5" P], [Env 3.9 x 7.5" L], [Env 110x220mm P], [Env
110x220mm L], [Env 162x229mm P], [Env 4.1 x 9.5" P]
• [Custom Size]
Sets the length and width of the paper.
Refer to
• " Setting the Paper Size of the Tray 1" (P. 79)
Display Screen Sets whether or not to display a message that prompts you to set the paper size and
type every time you load paper in the tray 1.
When you select [On], the message that prompts you to set the paper size and type is
displayed.
• [On] (default)
• [Off]
To Next Page
Loading...
Need help?
General
