170 7 Maintenance
7.15 Cleaning the Developer
When you have unsatisfactory printing results, such as having skewed, uneven halftone
images, clean the developer to solve this printing problem.
Use the following procedure to clean the developer.
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > or <Eject/Set> button to
accept the selection.
[Wired Network] is displayed.
4. Press the < > button until [Maintenance
Mode] is displayed.
5. Press the < > or <Eject/Set> button to
accept the selection.
[Adjust PaperType] is displayed.
6. Press the < > button until [Clean
Developer] is displayed.
7. Press the < > button or <Eject/Set> to
accept the selection.
The confirmation screen is displayed.
8. Press the <Eject/Set> button.
The cleaning of the developer starts. When
finished, the display returns to the print
screen.
Menu
Report / List
Menu
Admin Menu
Admin Menu
Wired Network
Admin Menu
Maintenance Mode
Maintenance Mode
Adjust PaperType
Maintenance Mode
Clean Developer
Clean Developer
Are you sure?
To Next Page
Loading...
Need help?
General
