38 2 Basic Operation
2.4 Setting/Exiting the Power Saver Modes
The printer has a power saving feature which reduces power consumption during periods
of inactivity. This feature operates in two modes: the Low Power mode and Sleep mode.
As delivered, the printer switches to the Low Power mode 3 minutes after the last print job
is printed. The printer then switches to the Sleep mode after another 2 minutes of inactivity.
When the printer is in the Low Power mode, the display shows [Ready/Standby]. In the
Sleep m
ode, all l
amps on the
control
panel exc
ept for the
<Power Sav
er> button go
out. The
display also goes blank and displays nothing.
The factory default settings of 3 minutes (Low Power mode) and 2 minutes (Sleep mode)
are changeable within the range of 3 - 60 minutes (Low Power mode) and 2 - 120 minutes
(Sleep mode). The printer consumes 5W or less in the Sleep mode, and returns to the
ready-to-print state in about 16 seconds when re-activated.
Note
• You can program your printer to disable the Sleep mode unless your printer is the model available in
China. The Sleep mode cannot be disabled on the Chinese model.
• For more information about the Low Power and Sleep modes and how to change their settings, refer to
"Setting Example: Changing the Power Saver Mode Setting" (P. 84).
Exiting the Power Saver Modes
The printer automatically exits the Power Saver modes when it receives a print job from a
computer.
To manually exit the Low Power mode, press any button on the control panel. To exit the
Sleep
mode
, press t
he <Power S
aver> but
ton.
Note
• When the printer is in the Low Power mode, opening and closing a cover will cause the printer to exit the
Low Power mode.
•
When t
he printer is in the
Sleep mod
e, all buttons o
n the contro
l panel except for
the <Power Sav
er>
button do not function.
T
o use t
he butt
ons on t
he cont
rol pa
nel, pr
ess the
<Power
Save
r> butt
on to ex
it the S
lee
p mode.
To Next Page
Loading...
Need help?
General
