To Next Page

To Previous Page

4.1 About Paper 73

Unsupported Paper

Do not use the following types of paper or media. They can cause paper jams or printer

failure.

• Transparencies

• Ink jet paper, ink jet transparencies, or ink jet postcards

• Paper that is too heavyweight or too lightweight

• Paper pre-printed with other printer or copier

• Wrinkled, creased, or ripped paper

• Damp or wet paper

• Lumpy or curled paper

• Static-cling paper

• Pasted-up or glued paper

• Postcards with pre-printed pictures

• Specially coated paper

• Color paper with surface treatments

• Paper that is coated with anti set-off white powder (micro powder)

• Paper that has perforations

• Paper that uses ink that deteriorates with heat

• Photosensitive paper

• Carbon paper

• Paper with staples, clips, ribbons, or tape

• Paper with rough surface, such as pulp paper or fibrous paper

• Acid paper (Texts printed on acid paper may blur. In such case, use alkaline paper

instead.)

• Envelopes that are not flat, or that have clasps

• Label paper with some labels already peeled off

•Tack film

• Water transfer paper

• Textile transfer paper

Important

• If you load postcards with pre-printed pictures, the anti set-off powder sticks to the feed rolls, preventing

the postcards from being fed properly.

Fuji Xerox DocuPrint C1110 User Manual

Other manuals for Fuji Xerox DocuPrint C1110