86 5 Control Panel Menus
Meter Readings
Displays the number of printed pages on the control panel. The meter is divided according
to the color modes.
Note
• For information on how to check the number of printed pages, refer to "7.3 Checking Printed Pages" (P.
139).
Admin Menu
The [Admin Menu] menu consists of eight submenus on the DocuPrint C1110 and five
submenus on the DocuPrint C1110 B, respectively.
• DocuPrint C1110 : [Wired Network], [USB Settings], [System Settings],
[Maintenance Mode], [PDF], [PCL], [PostScript], [Panel Settings]
• DocuPrint C1110 B : [System Settings], [Maintenance Mode], [PDF], [PCL],
[Panel Settings]
Wired Network (DocuPrint C1110 only)
Specifies printer settings for jobs sent to the printer through a network port.
Note
• The settings in [Wired Network] cannot be set when entering this menu during printing.
• You must reboot the printer to activate the new settings. After making the settings, switch the printer off
and then on again.
Item Description
Meter 1 Displays the total number of color prints.
Meter 2 Displays the total number of monochrome prints.
Meter 3 Displays the total number of large size color prints.
Meter 4 Displays the total of color and monochrome prints (Meter 1 + Meter 2).
Item Description
Ethernet Sets the communication speed and connector type for the Ethernet interface.
• [Auto] (default)
Automatically detects 10BASE-T (Half), 10BASE-T (Full), 100BASE-TX (Half), or
100BASE-TX (Full).
• [10BASE-T Half]
• [10BASE-T Full]
• [100BASE-TX Half]
• [100BASE-TX Full]
To Next Page
Loading...
Need help?
General
