Layout Adjustment
119
Copy
3
Image Shift (Adjusting the Image Position)
This feature allows you to shift the position of document images so that the images are
placed on the left, right, top, bottom, or center of paper. You can also adjust the amounts of
the left, right, top, and bottom margins. If you make 2-sided copies, you can adjust the
image positions for Side 1 and Side 2 individually.
Note •The image shift amount is set in accordance with the paper, and does not affect the setting made in
[Reduce/Enlarge].
1 Select [Image Shift].
2 Select any option.
Off
Does not shift the position of document images.
Auto Center
Shifts document images so that they are placed
in the center of paper.
Important • When you use this feature, please be sure to set the paper size. For more information, refer to
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in the
range from 0 to 50 mm in 1 mm increments.
Side 1
Displays the [Image Shift - Side 1] screen.
Refer to "[Image Shift - Side 1] Screen" (P.120).
Side 2
Displays the [Image Shift - Side 2] screen.
Refer to "[Image Shift - Side 2] Screen" (P.120).
Mirror Side 1
Select this check box when you want the positioning of Side 2 to match the positioning of
Side 1.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note •If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
To Next Page
Loading...
Need help?
General
