4 Fax
170
Fax
4
Simple Fax
You can select [Fax/Internet Fax] or [Simple Fax] on the Services Home screen to set the
features for the Fax service.
This section describes the features you can select on the [Simple Fax] screen. [Simple Fax]
allows you to use only basic features to easily send faxes. The following shows the reference
section for each feature.
Specifying a Destination Using the Numeric Keypad......................................................................................................... 170
Speed Dialing (Specifying a Destination Using an Address Number) ............................................................................ 171
Previewing the Read Images during a Simple Fax Job....................................................................................................... 172
Resolution (Specifying the Scanning Resolution)................................................................................................................ 172
Original Size (Selecting the Document Size) ......................................................................................................................... 173
2 Sided Scanning (Transmitting 2-sided Originals) ............................................................................................................ 173
1 Select [Simple Fax] on the Services Home
screen.
Note •[Simple Fax] is not displayed on the Services
Home screen when the Server Fax service is
enabled.
2 Select a feature on the [Simple Fax] screen.
Note •For the Simple Fax service, you can only set
[Resolution], [Original Type], and [2 Sided
Scanning]. In addition, when you use this
service, [Original Type] is set to [Text], and
[Transmission Header Text] is set to [Display
Header]. If you want to set the other options,
use [Fax/Internet Fax] on the Services Home
screen to send faxes.
• You cannot switch between [Fax/Internet Fax] and [Simple Fax]. To switch one to another, you must
return to the Services Home screen. Once you return to the Services Home screen, the settings you
have made in [Fax/Internet Fax] or [Simple Fax] will be cleared.
Specifying a Destination Using the Numeric Keypad
Specify a destination using the numeric keypad.
1 Enter a fax number using the numeric keypad.
Note •If you have entered an incorrect value, press
the <C (Clear)> button and enter the correct
value.
  
123
456
789
0
＃
C
Power D
Clear All
Interrupt
Start
Log In / Out
Review
(Not In Use)
Copy
Services Home
Job
Status
ABC
GHI
PQRS
Dial
Pause
Speed
Dial
TUV WXYZ
JKL MNO
DEF
To Next Page
Loading...
Need help?
General
