Layout Adjustment
191
Fax
4
Top Page then Bottom
Scans the top page and then the bottom page of facing pages.
Both Pages
Scans both pages in page order.
Left Page Only
Scans the left page only. You can select this option when [Left Page then Right] or [Right
Page then Left] is selected.
Right Page Only
Scans the right page only. You can select this option when [Left Page then Right] or [Right
Page then Left] is selected.
Top Page Only
Scans the top page only. You can select this option when [Top Page then Bottom] is selected.
Bottom Page Only
Scans the bottom page only. You can select this option when [Top Page then Bottom] is
selected.
Reduce/Enlarge (Specifying a Scan Ratio)
This feature enlarges or reduces scanned images with a specified ratio.
Important • Some destination machines may not be able to receive faxes at the specified ratio.
1 Select [Reduce/Enlarge].
2 Select a preset ratio, or specify a value.
Variable %
Specify a ratio in the range from 50 to 400% in
1% increments. To specify a value, use the
numeric keypad or [+] and [-].
Preset %
100%
Scans at the same size as the original.
Auto %
If the scan width of the document exceeds the maximum image size, the scanned image
is reduced to fit the maximum size.
When the speed dialing is used, the maximum image size will be the size registered in the
Address Number. When speed dialing is not used, the maximum size will be A4.
Preset ratios
Select from preset scan ratios.
To Next Page
Loading...
Need help?
General
