Layout Adjustment
121
Copy
3
Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
Important • When you use this feature, please be sure to set the paper size. For more information, refer to
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in the
range from 0 to 50 mm in 1 mm increments.
Invert Image (Making Reversed Copies of Images)
This feature allows you to reverse the left and right sides of the document image or to create
a negative image of the document when making copies.
Important • When you use this feature, please be sure to set the original size. For more information, refer to
"Original Orientation (Specifying the Orientation of Loaded Documents)" (P.121).
Note •When [Output Color] is set to [Black & White] or [Single Color], the black color on the document is
inverted to white, and the white color to black.
• When [Output Color] is set to [Color], the colors are inverted to their complementary colors.
• When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns to white.
1 Select [Invert Image].
2 Select any option.
Mirror Image
Reverses the left and right sides of the
document image.
Negative Image
Creates a negative image of the document.
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document so that the machine can
identify the top of the document.
Note •If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
1 Select [Original Orientation].
To Next Page
Loading...
Need help?
General
