FujiFilm X-T20 User Manual

109
5
Taking Photographs
Flash Photography
Flash Settings
The following settings are
available with the built-in  ash.
MODE
Built-In Flash
ADJUST
END
Setting
Setting
Description
Description
A
Flash control
mode
Choose from the following options:
•
TTL: TTL mode. Adjust fl ash compensation (
B
)
and choose a fl ash mode (
C
).
•
M: The fl ash fi res at the selected output (
B
) re-
gardless of subject brightness or camera settings.
Output is expressed in fractions of full power,
from ⁄ to ⁄. The desired results may not be
achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and
check the results.
•
C (COMMANDER): Choose if the fl ash is being
used to control remote synced fl ash units, for ex-
ample as part of a studio fl ash system.
•
OFF: The fl ash does not fi re.
B
Flash compen-
sation/output
Adjust fl ash level. The options available vary with
the fl ash control mode (
A
).

FujiFilm X-T20 Specifications

General

Megapixels	24.3 MP
ISO Range	200-12800 (expandable to 100-51200)
Continuous Shooting Speed	8 fps
Weight	383 g (including battery and memory card)
Image Processor	X-Processor Pro
Wireless Connectivity	Wi-Fi
Battery	NP-W126S Li-ion battery
Dimensions	118.4 x 82.8 x 41.4 mm
Sensor	APS-C X-Trans CMOS III
Autofocus Points	91 points
Screen	3.0-inch tilting LCD (1.04M dots)
Viewfinder	0.39-inch OLED (2.36M dots)
Video Resolution	4K at 30 fps, Full HD at 60 fps
Battery Life	Approx. 350 shots
Shutter Speed	1/4000 sec to 30 sec