Fujitsu CT114 User Manual

CT114_Rev2
4
General Information
Introduction
This Cleaver (CT114) is for use with a single optical fiber.
In order to master the CT114, read this instruction manual.
CT114
This model is applicable for cleaving up to 660m diameter fiber. This CT114 model does
not have the angled cleaving unit.
Notes
LCD (Liquid Crystal Display) Monitor
The machine has an LCD monitor. The LCD is manufactured in a high quality-controlled
factory environment; however, some black or red/green/blue dots may remain on the
screen. The screen brightness may not appear uniform depending on viewing angle.
Note that these symptoms are not defects, but are the nature of LCD screens.

Fujitsu CT114 Specifications

General

Brand	Fujitsu
Model	CT114
Category	Measuring Instruments
Language	English