− 24/83 −
5-2. Paper Width Setting (Width: 58mm / 80mm)
As the factory setting for paper width is 80mm, follow the instructions in "5-3.
Setting the Paper" to set the paper roll when using 80mm paper.
When using 58mm paper, first attach the separator in accordance with the
instructions in "5-2-1. Attaching the Separator" and then set the paper roll.
Also, follow the instructions in "9-2. Changing the Setup" to set the "Paper
Width" in the printer setup to "58mm/35columns" or "58mm/32columns".
Caution: Do not switch from the 58mm width paper to 80mm width
paper when printing is in progress. When using narrow-width
paper, a part of the thermal head may directly come in contact
with the platen roller without any paper present. This causes
the head to wear down, resulting in poor printing quality.
In addition, as the cutter blade also works on sections without
paper, the cutter blade may wear down, resulting in a bad cut.
Caution: As the thermal head may be damaged by static electricity, do
not touch the thermal head except for cleaning.
Roll Holder
Thermal Head
To Next Page
Loading...
Need help?
General