Working with the notebook
Wireless LAN /BlueTooth/UMTS (optional)
The inst allation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on a nd off
Before switching on your device for the first time, the on/off switch for
wireless c ompo nents must be in the "ON" position.
► Slide the ON/OFF switch into the "ON"
position to activate the wireless co mponents.
Wireless LANWireless LANBluetoothBluetooth
or
► Slide the ON/OFF switch to the
"OFF" position to deactivate the
wireless com ponents.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the wireless components.
You c an also deactivate the wireless c ompo nents individually in the BIOS Setup.In
order to be able to do this, you will either need to know the supervisor password
if one has been assigned , or no password must have been assigned.
Pay attention to the additional safety notes for devices with ra dio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMT S from your service pro vider.
Fujitsu Technology Solutions 45
To Next Page
Loading...
Need help?
General